NUMECA | Meshing Workshop

Automotive CFD-Workshop - 2021

Do you think meshing your models should be faster than running the simulation? We do!

The intuitive and powerful NUMECA meshing suite enables you to step up your productivity in no time. Learn more about it in our unique online Meshing Workshop. As in every other workshop, we introduce you to our CFD solutions dedicated to your industry. We will give you an insight into customer projects and demonstrate our state-of-the-art preprocessing and mesh generation methodology with NUMECA Meshing tools. And finally, you get exclusive insights into our latest developments regarding Higher-Order methods and LES.

So why does it differ from every other workshop?
We split the workshop into two parts. And in-between is a hands-on session, where the stage is all yours. You have five hours to test our CFD software. We provide you with the software, a demo case and an instruction video. Of course, we do not leave you all alone. Our experts are ready to answer your questions via chat, phone or video call.

We will be showing the latest developments for high fidelity numerical simulations and everything connected to it:

• Intuitive CAD preparation, meshing and setup
• Fast, accurate & highly dynamic simulations
• Optimisation & Acoustics
• Higher-Order Methods

New to CFD? Get to know our intuitive CFD suite:

• Input: Geometry, operating conditions
• Output: 3D-CFD results

Expert in CFD? See how Users in the automnitve industry benefit.

• Honda Automobile Explains How They Save CPU Time with HEXPRESS™/Hybrid
• Side Mirror Noise with Adaptive Spectral Reconstruction
• Analysis of Tonal Noise Emissions (Hochschule Trier)
• Renault: Aerodynamic optimization of Exhaust Gas Recirculation (EGR) for car compressors
• The World Solar Challenge – Aerodynamic simulation of rotating wheels in a solar car
• Toyota Motorsports: Optimization of a Turbocharger Compressor for Motorsport Applications

Still not convinced? We have more in store:

• Fast and easy meshing of complex geometries
• Granular mesh control with intuitive tools
• Hands-on experience with our CFD suite OMNIS™, which seamlessly integrate with commercial, in-house and open-source solvers

Hands-On Session

The stage is all yours! After half an hour introduction you can directly start on your own.
We provide you with:

• a test license valid for 2 weeks or a 24hour container.
• a test case.
• a tutorial video, which you can follow step-by-step.
• support during our workshop day from our experts via phone
   

  Full Agenda

  When (CET)	Title	Presenter
  9:00 am	Welcome and Introduction	Dr. Thomas Hildebrandt NUMECA
  9:05 am	Solution for Automotive & Transport	Dr. Thomas Hildebrandt NUMECA
  9:35 am	How do I apply OMNIS to overcome my daily meshing challenges?	Manuel Cellarius NUMECA
  10:00am	Time to do it yourself!  – Our experts support you!	All Hands-On Session
  15:00 pm	Wrap-up Hands-On session	Manuel Cellarius NUMECA
  15:30 pm	Higher Order Methods – TBD	TBD NUMECA
  15:55 pm	Closure of the Workshop and Final Comments	Dr. Thomas Hildebrandt NUMECA

   

  Register now

The Key to Productivity

Do you think meshing your models should be faster than running the simulation? We do!

The intuitive and powerful NUMECA meshing suite enables you to step up your productivity in no time.

Let us invite you to our Meshing Workshop where our experts provide hands-on experience in state-of-the art preprocessing and mesh generation methodology with NUMECA Meshing tools. Learn from Bosch Rexroth, how to take advantage from the highly automated and robust meshing workflow using HEXPRESS™/Hybrid.

Over a range of applications from aircraft, automotive to complex turbomachinery we will bring you:

• Fast and easy meshing of complex geometries
• Expert knowledge from our customers
• Granular mesh control with intuitive tools
• Hands-on experience with our mesh generators HEXPRESS™/Hybrid which seamlessly integrate with commercial, in-house and open source solvers

Agenda

10:00 Registration & coffee
10:15 Welcome & introduction
10:30 NUMECA’s unstructured meshing tool for complex geometries
11:00 Bosch Rexroth AG, Dr.-Ing. Paul Zielke – Advanced Meshing Applications
11:30 Live demonstration
12:00 Lunch break
13:00 Hands-on session
15:30 Wrap-up & close

REGISTER HERE